Click image to view full size image
●Product Introduction:
Single-sided FR-4 PCB refers to the most basic PCB which components are concentrated on one side, the circuit trace are concentrated on the other side, Single-sided FR-4 PCB circuit trace are mainly process by th screen printing, the resist is printed on the copper surface, and then the mark is printed with solder resist after etching, Finally, the drill holes of the components and the shape of the Single-sided FR-4 PCB are completed by punching.
●Product Specification：
Material: |
FR-4 |
Solder Mask: |
Green |
FR4-TG: |
- |
Min Trace Width/Spacing: |
6/6mil↑ |
Layers: |
1-layer |
Min Hole Size: |
0.3mm↑ |
Size: |
110x 90 mm |
Minimum Solder Mask Dam: |
0.4mm↑ |
Different Design in Panel: |
1 |
Half Hole: |
No |
Quality Level |
IPCII |
Surface Finish: |
HASL Lead free |
Board Thickness: |
1.0mm |
Finished Copper: |
1oz |
Silkscreen: |
White |
Test Type: |
Fully test |
●Product Features:
1) Suitable for engineers and electronics enthusiasts who are just getting started.
2) Meet UL security standards, high fire rating.
3) Long service life and high reliabilityreat heat dissipation.
●Product Application:
Single-sided FR-4 PCB always be used in make some simple design prototype, like LED board, connection board, a patch feed antenna board etc. Suitable be used in early learning circuit design.
● Product Detals:
●Deliver
4-5 working days include shipping time
●Safeguards Ordinance
http://www.szospcb.com/